Dụng cụ chia mẫu

Còn hàng

Model Haver - Germany

Giá

Liên hệ

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

Dụng cụ chia mẫu
Hãng sản xuất: Haver - Germany

Representative test samples can be easily and reliably produced with HAVER Sample Splitters.
These sample reducers form two representative partial quantities by means of alternately arranged dividers.
They are available in two different sizes and with different sized dividers depending on the product.
Your advantages at a glance
Representative test samples.
The smooth surface of plastic laminated receivers prevents cross contamination.
Easily and low costly sample division.
Technical data
	RT 75	RT 50	RT 37.5	RT 25	RT 12.5	RT 6.3
Openings [mm]	75	50	37.5	25	12.5	6.3
Divisions	6	8	12	16	18	12
Max. Material feed size (mm)*	approx. 50	approx. 33	approx. 25	approx. 16	approx. 8	approx. 4
Receiver volume (Litre)	8	8	8	8	1.7 / 2
Divider material	galvanized sheet steel				stainless steel
Dimensions [mm]	620 x 260 x 420				300 x 250 x 270
Đơn giá (VND)
Application examples for HAVER Sample Splitters
Industrial rocks and minerals
Ceramic
Granulates
Fertilizer and seed
Mode of operation
The divider consists of a number of alternatively arranged partitions with openings at the top and at the bottom.
The material is collected in alternate receivers.
The main advantage of the apparatus is that the sample is divided over the whole "corss-section".
The material has to be distributed regularly over the whole length of the sample splitter.
In general, the grater the number and the smaller the divisions, the better will be the splitting.
However the number of divisions depends on the grain size of the sample material.
One of the split samples is rejected. The other may be split again and again by the same operation until
the required quantity for test sieving is achieved.

Dụng cụ chia mẫu

Sản phẩm liên quan

Hỗ trợ nhanh

Yêu cầu báo giá